Print Back

316 Stainless Steel Note: Mechanical swage fitting allows attachment to a flat surface with alignment through 160 degree +- Very fast and simple attachment to cable (1x19, 7x19,xor 7x7) WLL is determined by WLL of wire used. “Quick Attach ™” fittings are designed for architectural and marine applications. “Quick Attach ™” fittings are not intended for lifting or other critical application. Typical breaking strength of “Quick Attach ™” fittings are 90% of nominal cable strength when properly installed. Please use adequate safety factor (e.g. 5:1) when designing your assembly. WLL is determined by WLL of wire used.

These quick attached wall toggles are designed to be installed on to wire rope or aircraft cable.

quick-attach-wall-toggle
1 

Item #

A Wire size

B Fastener

C

D

Weight (lbs)

S0779-0703 N/A 1/8" N/A 1/4" N/A 1.58 N/A 2.00" N/A 0.10
S0779-0704 N/A 5/32" N/A 1/4" N/A 1.58 N/A 2.25" N/A 0.12
S0779-0905 N/A 3/16" N/A 5/16" N/A 1.75 N/A 2.75" N/A 0.22
S0779-1007 N/A 1/4" N/A 3/8" N/A 2.00 N/A 3.50" N/A 0.35
1