Swageless fittings are designed for architectural and marine applications. Swageless fittings are not intended for lifting or other critical application. Please use adequate safety factor (e.g. 5:1) when designing your assembly.

These stainless steel swageless eye are designed to be installed on to wire rope or aircraft cable.

Swageless fittings are designed for architectural and marine applications. Swageless fittings are not intended for lifting or other critical application. Please use adequate safety factor (e.g. 5:1) when designing your assembly.

These stainless steel swageless jaw are designed to be installed on to wire rope or aircraft cable.

Swageless fittings are designed for architectural and marine applications. Swageless fittings are not intended for lifting or other critical application. Please use adequate safety factor (e.g. 5:1) when designing your assembly.

These stainless steel swageless jointer are designed to be installed on to wire rope or aircraft cable.

Swageless fittings are designed for architectural and marine applications. Swageless fittings are not intended for lifting or other critical application. Please use adequate safety factor (e.g. 5:1) when designing your assembly.

These stainless steel swageless threaded stud are designed to be installed on to wire rope or aircraft cable.

Swageless fittings are designed for architectural and marine applications. Swageless fittings are not intended for lifting or other critical application. Please use adequate safety factor (e.g. 5:1) when designing your assembly.

These stainless steel deck toggle & swageless turnbuckles are designed to be installed on to wire rope or aircraft cable.

Swageless fittings are designed for architectural and marine applications. Swageless fittings are not intended for lifting or other critical application. Please use adequate safety factor (e.g. 5:1) when designing your assembly.

These stainless steel toggle & swageless turnbuckles are designed to be installed on to wire rope or aircraft cable.

Swageless fittings are designed for architectural and marine applications. Swageless fittings are not intended for lifting or other critical application. Please use adequate safety factor (e.g. 5:1) when designing your assembly.

These stainless steel jaw & swageless turnbuckle are designed to be installed on to wire rope or aircraft cable.

316 Stainless Steel Note: Mechanical swage fitting allows very fast and simple attachment of cable (1x19,7x19, or 7x7) to wood using only simple tools. “Quick Attach ™” fittings are designed for architectural and marine applications. “Quick Attach ™” fittings are not intended for lifting or other critical application. Typical breaking strength of “Quick Attach ™” fittings are 90% of nominal cable strength when properly installed. Please use adequate safety factor (e.g. 5:1) when designing your assembly. WLL is determined by WLL of wire used.

These quick attached wood studs are designed to be installed on to wire rope or aircraft cable.

“Quick Attach ™” fittings are designed for architectural and marine applications. “Quick Attach ™” fittings are not intended for lifting or other critical application. Typical breaking strength of “Quick Attach ™” fittings are 90% of nominal cable strength when properly installed. Please use adequate safety factor (e.g. 5:1) when designing your assembly. WLL is determined by WLL of wire used.

These quick attached studs are designed to be installed on to wire rope or aircraft cable.

316 Stainless Steel Note: Mechanical swage fitting allows very fast and simple attachment using a bolt or stud through a platel WLL is determined by WLL of wire used. For use with bolts or similar fasteners. “Quick Attach ™” fittings are designed for architectural and marine applications. “Quick Attach ™” fittings are not intended for lifting or other critical application. Typical breaking strength of “Quick Attach ™” fittings are 90% of nominal cable strength when properly installed. Please use adequate safety factor (e.g. 5:1) when designing your assembly. WLL is determined by WLL of wire used.

These quick attached receivers are designed to be installed on to wire rope or aircraft cable.

316 Stainless Steel Note: Mechanical swage fitting allows attachment to a flat surface with alignment through 160 degree +- Very fast and simple attachment to cable (1x19, 7x19,xor 7x7) WLL is determined by WLL of wire used. “Quick Attach ™” fittings are designed for architectural and marine applications. “Quick Attach ™” fittings are not intended for lifting or other critical application. Typical breaking strength of “Quick Attach ™” fittings are 90% of nominal cable strength when properly installed. Please use adequate safety factor (e.g. 5:1) when designing your assembly. WLL is determined by WLL of wire used.

These quick attached wall toggles are designed to be installed on to wire rope or aircraft cable.

These kwik-grips are designed to be installed on to wire rope or aircraft cable.

The Rize Kwik-Loc™ cable lock can be used as a fast and reliable way to suspend flourescent lighting, HID's, sound systems, cable trays, fan units or seismic bracing. Cable locks are to be used on static load applications only. 
"S" models have a locking pin added for security

• Zinc Housing
  One piece die cast Zinc type Zamak 5 combines major anti-corrosion
  properties with strength and consistent manufacturing quality.
• Locking Wedges
  An oil impregnated sintered steel locking wedge is seated in each of two channels. Both wedges incorporate a release pin for easy adjustment. Each wedge makes contact with the cable using serrated teeth. These teeth press onto the cable and spread the load across the length of the wedge, maximizing grip strength.
• Stainless Steel Springs
  Each spring is manufactured of type 302 S26 stainless steel.
  
  These kwik-loc cable jointers are designed to be installed on to wire rope or aircraft cable.