Print Back

316 Stainless Steel Note: Mechanical swage fitting allows very fast and simple attachment using a bolt or stud through a platel WLL is determined by WLL of wire used. For use with bolts or similar fasteners. “Quick Attach ™” fittings are designed for architectural and marine applications. “Quick Attach ™” fittings are not intended for lifting or other critical application. Typical breaking strength of “Quick Attach ™” fittings are 90% of nominal cable strength when properly installed. Please use adequate safety factor (e.g. 5:1) when designing your assembly. WLL is determined by WLL of wire used.

These quick attached receivers are designed to be installed on to wire rope or aircraft cable.

quick-attache-reciever
1 

Item #

A Wire size

B Thread

C

D

Weight (lbs)

S0770-0703 N/A 1/8" N/A 1/4-28 N/A 0.54" N/A 1.46" N/A 0.07
S0770-0704 N/A 5/32" N/A 1/4-28 N/A 0.63" N/A 1.68" N/A 0.12
S0770-0905 N/A 3/16" N/A 5/16-24 N/A 0.75" N/A 2.02" N/A 0.18
S0770-1007 N/A 1/4" N/A 3/8-24 N/A 0.84" N/A 2.50" N/A 0.28
1