COMPANY HEADER
  • -12_eyelet
  • Primary Image
Warning: Stamped eyelets must be assembled with a mechanical or hydraulic swager using properly designed dies.
The below holding strengths are based on 7x7 and 7x19 construction.
A pull test should be performed to determine the holding strength of the applied eye, and suitability for your application.

These stamped eye ends are designed to be crimped on to wire rope or aircraft cable.
26 - 50 of 50 | Results Per Page | View | Unit of Measure
1 2 
Request Information Compare Items Search by Specification

Item #

To Fit Wire Rope Dia (in)

A Pin Hole (in)

B (in)

C (in)

D (in)

E (in)

Material Type

Wt/100 pcs (lbs)

Add To Cart/Request Quote
N/A 3/32" N/A 0.25 N/A 0.5 N/A 0.093 N/A 0.47 N/A 1.42 N/A S.S. T304 N/A 1.88 Add To Cart
Request Quote
N/A 3/32" N/A 0.375 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A Z.P. Steel N/A 2.04 Add To Cart
Request Quote
N/A 3/32" N/A 0.375 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A S.S. T304 N/A 2.04 Add To Cart
Request Quote
N/A 3/32" N/A 0.5 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A Z.P. Steel N/A 1.81 Add To Cart
Request Quote
N/A 3/32" N/A 0.5 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A S.S. T304 N/A 1.81 Add To Cart
Request Quote
N/A 1/8" N/A 0.25 N/A 0.58 N/A 0.125 N/A 0.58 N/A 1.95 N/A Z.P. Steel N/A 4.66 Add To Cart
Request Quote
N/A 1/8" N/A 0.25 N/A 0.58 N/A 0.125 N/A 0.48 N/A 1.95 N/A S.S. T304 N/A 4.66 Add To Cart
Request Quote
N/A 1/8" N/A 0.316 N/A 0.58 N/A 0.125 N/A 0.58 N/A 1.95 N/A Z.P. Steel N/A 4.64 Add To Cart
Request Quote
N/A 1/8" N/A 0.316 N/A 0.58 N/A 0.125 N/A 0.48 N/A 1.95 N/A S.S. T304 N/A 4.64 Add To Cart
Request Quote
N/A 1/8" N/A 0.375 N/A 0.85 N/A 0.125 N/A 0.85 N/A 1.84 N/A Z.P. Steel N/A 4.92 Add To Cart
Request Quote
N/A 1/8" N/A 0.375 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A S.S. T304 N/A 4.92 Add To Cart
Request Quote
N/A 1/8" N/A 0.5 N/A 0.85 N/A 0.125 N/A 0.85 N/A 1.84 N/A Z.P. Steel N/A 4.56 Add To Cart
Request Quote
N/A 1/8" N/A 0.5 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A S.S. T304 N/A 4.56 Add To Cart
Request Quote
N/A 1/8" N/A 0.547 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A Z.P. Steel N/A 4.56 Add To Cart
Request Quote
N/A 1/8" N/A 0.343 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A Z.P. Steel N/A 4.56 Add To Cart
Request Quote
N/A 5/32 - 3/16" N/A 0.313 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A Z.P. Steel N/A Add To Cart
Request Quote
N/A 5/32 - 3/16" N/A 0.313 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A S.S. T304 N/A Add To Cart
Request Quote
N/A 5/32 - 3/16" N/A 0.38 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A Z.P. Steel N/A Add To Cart
Request Quote
N/A 5/32 - 3/16" N/A 0.38 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A S.S T304 N/A Add To Cart
Request Quote
N/A 5/32 - 3/16" N/A 0.501 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A Z.P. Steel N/A Add To Cart
Request Quote
N/A 5/32 - 3/16" N/A 0.501 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A S.S T304 N/A Add To Cart
Request Quote
N/A 1/4" N/A 0.512 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A Z.P. Steel N/A Add To Cart
Request Quote
N/A 1/4" N/A 0.512 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A S.S T304 N/A Add To Cart
Request Quote
N/A 1/4" N/A 0.635 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A Z.P. Steel N/A Add To Cart
Request Quote
N/A 1/4" N/A 0.635 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A S.S T304 N/A Add To Cart
Request Quote
26 - 50 of 50 | Results Per Page | View | Unit of Measure
1 2