Type I, Comp A

Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Dia (in)

Construction

Material

Lay

Specification

Add To Cart/Request Quote
Sort by
N/A 1/16 N/A 1x7 N/A Galvanized N/A Right N/A MIL-DLT-87161 Type 1 Comp A, Construction 1 Request Quote
N/A 1/16 N/A 1x7 N/A Galvanized N/A Left N/A MIL-DLT-87161 Type 1 Comp A, Construction 2 Request Quote
N/A 3/64 N/A 1x7 N/A Galvanized N/A Right N/A MIL-DLT-87161 Type 1 Comp A, Construction 1 Request Quote
N/A 3/64 N/A 1x7 N/A Galvanized N/A Left N/A MIL-DLT-87161 Type 1 Comp A, Construction 2 Request Quote
N/A 1/32 N/A 1x7 N/A Galvanized N/A Right N/A MIL-DLT-87161 Type 1 Comp A, Construction 1 Request Quote
N/A 1/32 N/A 1x7 N/A Galvanized N/A Left N/A MIL-DLT-87161 Type 1 Comp A, Construction 2 Request Quote
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1