Stock Eye Nuts listed below, other than Blanks, are drilled and tapped standard regardless of finish. Both types drilled only, with special tapping or finish supplied to specification. Loads are based on a safety factor of 5 to 1. Blanks are self-colored.

NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.

Drilled & Tapped Stainless Steel Type 316
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Bail Size (in)

Tap Size

Wt. per 100 pcs (lbs)

Safe Working Load

Add To Cart/Request Quote
Sort by
N/A 5/8" N/A 3/4" - 10 N/A 103 N/A 5200 lbs Request Quote
N/A 1/2" N/A 5/8" - 11 N/A 61.5 N/A Request Quote
N/A 3/8" N/A 1/2" - 13 N/A 29.3 N/A 2240 lbs Request Quote
N/A 3/8" N/A 3/8" - 16 N/A 34 N/A 1240 lbs Request Quote
N/A 1/4" N/A 5/16" - 18 N/A 8 N/A 840 lbs Request Quote
N/A 1/4" N/A 1/4" - 20 N/A 8.2 N/A 520 lbs Request Quote
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1