Unit of Measure
                    
               
        
            
                                                                                Nominal Rope Diameter | 
                                                                        N/A 7/16 | 
                                                                                Maximum Rope Diameter | 
                                                                        N/A 0.459 | 
                                                                                MBS | 
                                                                        N/A 15,860 lbs | 
                                                                                Weight (lb/ft) | 
                                                                        N/A 0.296 | 
                                                                                Construction | 
                                                                        N/A 6x7 | 
                                                                                Material | 
                                                                        N/A Bright | 
            Rope Information: 6x7 Right Regular Lay, Improved Plow Steel, Drawn Galvanized, Poly Core, C-Lube.
US FEDERAL SPECIFICATION RR-W-410D
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
US FEDERAL SPECIFICATION RR-W-410D
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.