Print Back

Drop forged heat treated steel eye bolts supplied as standard with hot galvanized finish. Machine thread eye bolts are threaded National Course before galvanizing and assembled with hex nuts tapped oversize. Loads are based on a safety factor of 5 to 1. When tested all eye bolts are pulled at a uniform rate of speed in a direct tension.

Warning: Any deviations such as angular lifts, shock loads, modification of the basic forging, etc., will result in drastically reduced working load limits.

Special shank and thread lengths are also available.

These drop forged machine threaded eye bolts are designed to be attached to a cable assembly via the open eye end or the threaded end stud.

Unit of Measure

Specifications

Diameter (A) & Shank Length (B)

N/A 1" x 24"

Outside Eye (C)

N/A 3-3/4"

Inside Eye (D)

N/A 2"

Overall Length (E)

N/A 27-3/4"

Thread Length (T)

N/A 6" "

Wt. per 100 pcs (lbs)

N/A 716

WLL (lbs)

N/A 10000