Print Back
2.5 inches (64 mm) wide side plates; two cables. For cowl, instrument panel, seat riser or frame installation. Note: When considering load requirements, the load on the lever assembly will be the sum of the load in each cable.

Kit B835 - supplied with the following hardware:
  • Clevis Pins (2)
  • Cotter Pins (2)
  • Washers (2)
  • Mounting Spacers (2)
  • Cable Clamps
Unit of Measure

Specifications

Innermember Fitting @ 3000 lb

N/A 157-047-002

Innermember Fitting @ 1500 lb

N/A 157-047-000

Conduit Fitting @ 3000 lb

N/A 072 073

Conduit Fitting @ 1500 lb

N/A 062
Dim A1 N/A 2.27 "2.40 "
Dimension Bmin.2 N/A 2.91 "3.04 "
Dimension Bmax.3 N/A 4.51 "4.69 "
  • 1 Dimension A is with the lever in full “OFF” position. Use dimension A in calculating cable length.
  • 2 Dimension B minimum is with the lever in full “ON” position and adjusted for minimum (CCW) travel. Use dimension B minimum during installation and initial adjustment. Turn knob (CW) to add travel and increase brake pressure setting.
  • 3 Dimension B maximum is with the lever in full “ON” position and adjusted for maximum (CW) travel.