Print Back

Type I, Comp A

Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.

7x7_Uncoated
Unit of Measure
Items 7x7_Uncoated
M83420/1-001
MIL-DTL-83420 Type I Comp A
7x7_Uncoated
M83420/1-002
MIL-DTL-83420 Type I Comp A
7x7_Uncoated
M83420/1-003
MIL-DTL-83420 Type I Comp A
7x7_Uncoated
M83420/1-004
MIL-DTL-83420 Type I Comp A
7x7_Uncoated
M83420/1-005
MIL-DTL-83420 Type I Comp A
Dia (in) N/A 1/16 N/A 3/32 N/A 1/8 N/A 1/8 N/A 5/32
Construction N/A 7 x 7 N/A 7 x 7 N/A 7 x 19 N/A 7 x 19 N/A 7 x 19
Material N/A

Galvanized, Non Jacketed

Specification N/A MIL-DTL-83420 Type 1 Comp A
MBS-Composition A N/A 480 N/A 920 N/A 2000 N/A 2000 N/A 2800
Cross Reference N/A 4010-01-163-6007 N/A 4010-00-243-3589 N/A 4010-00-171-4236 N/A 4010-00-222-4495 N/A 1640-00-285-3705