Print Back
Stock Eye Nuts listed below, other than Blanks, are drilled and tapped standard regardless of finish. Both types drilled only, with special tapping or finish supplied to specification. Loads are based on a safety factor of 5 to 1. Blanks are self-colored.

NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.

Blank: Self-Colored
Drilled & Tapped: Self-Colored or Hot Galvanized

Drop-Forged-Eye-Nut-Made-In-USA
Unit of Measure
Items Eye Nut
160056
Blank SC
Eye Nut
160100
Blank SC
Eye Nut
160155
Blank SC
Eye Nut
160209
Blank SC
Eye Nut
160254
Blank SC
Stock # N/A C-186A N/A C-186B N/A C-187A N/A C-185B N/A C-185A
Bail Size (in) N/A 1/4" N/A 1/4" N/A 5/16" N/A 3/8" N/A 3/8"
Tap Size N/A Blank
A N/A 1-1/4 N/A 1-1/4 N/A 1-5/8 N/A 2 N/A 2
D N/A 1-1/16 N/A 1-1/16 N/A 1-1/4 N/A 1-1/2 N/A 1-1/2
E N/A 19/32 N/A 19/32 N/A 3/4 N/A 1 N/A 1
F N/A 1/2 N/A 1/2 N/A 9/16 N/A 13/16 N/A 13/16
S N/A 1/4 N/A 1/4 N/A 5/16 N/A 3/8 N/A 3/8
T N/A 1-11/16 N/A 1-11/16 N/A 2-1/16 N/A 2-1/2 N/A 2-1/2
C N/A 3/4 N/A 3/4 N/A 1 N/A 1-1/4 N/A 1-1/4
Safe Working Load N/A