Lexco Cable Mfg.
7320 West Agatite
Norridge, IL 60706
PH 800.626.6556
PH 773.588.8890
FX 773.478.4584
sales@lexcocable.com
All Categories > Wire Rope Fittings > Eye Ends > Stamped Eyelets > View Items  

Stamped Eyelets

 
Check up to five results to perform an action.

Warning: Stamped eyelets must be assembled with a mechanical or hydraulic swager using properly designed dies.
The below holding strengths are based on 7x7 and 7x19 construction.
A pull test should be performed to determine the holding strength of the applied eye, and suitability for your application.

These stamped eye ends are designed to be crimped on to wire rope or aircraft cable.



  Results 1 - 50 of 50 1 

Item #

To Fit Wire Rope Dia (in)

A Pin Hole (in)

B (in)

C (in)

D (in)

E (in)

Material Type

Wt/100 pcs (lbs)
305-S-142 .014”-3/64” .142 0.260 0.040 0.150 0.580 S.S. T304 0.12
2083-01.5 3/64" 0.16 0.32 0.06 0.315 0.715 Z.P. Steel 0.38
2081-01.5 3/64" 0.16 0.32 0.06 0.315 0.715 S.S. T304 0.38
2023-01.5 3/64" 0.19 0.32 0.06 0.315 0.715 Z.P. Steel 0.35
2021-01.5 3/64" 0.19 0.32 0.06 0.315 0.715 S.S. T304 0.35
2313-02 1/16" 0.129 0.46 0.06 0.385 0.965 Z.P. Steel 0.74
315-S-142 1/16" 0.142 0.43 0.0625 0.39 0.95 N/A N/A
2091-02 1/16" 0.129 0.38 0.035 0.34 0.65 S.S. T304 0.25
2091-02-144 1/16" 0.144 0.38 0.035 0.34 0.65 S.S. T304 0.25
2101-02 1/16" 0.194 0.38 0.035 0.34 0.65 S.S. T304 0.24
2003-02 1/16" 0.19 0.43 0.06 0.32 0.94 Z.P. Steel 0.69
2001-02 1/16" 0.19 0.43 0.06 0.32 0.94 S.S. T304 0.69
2013-02 1/16" 0.26 0.43 0.06 0.32 0.94 Z.P. Steel 0.63
2011-02 1/16" 0.26 0.43 0.06 0.32 0.94 S.S. T304 0.63
2173-02 1/16" 0.204 0.46 0.06 0.4 0.978 Z.P. Steel 0.65
2171-02 1/16" 0.204 0.46 0.06 0.4 0.978 S.S. T304 0.65
318-P-315 1/16" 0.315 0.625 0.060 0.34 1.0 Z.P. Steel N/A
318-P-375 1/16" 0.378 0.625 0.060 0.34 1.0 Z.P. Steel N/A
318-P-438 1/16" 0.438 0.625 0.060 0.34 1.0 Z.P. Steel N/A
318-S-315 1/16" 0.315 0.625 0.060 0.34 1.0 S.S. T304 N/A
318-S-375 1/16" 0.378 0.625 0.060 0.34 1.0 S.S. T304 N/A
318-S-438 1/16" 0.438 0.625 0.060 0.34 1.0 S.S. T304 N/A
2303-03 3/32" 0.205 0.5 0.093 0.47 1.42 Z.P. Steel 1.92
2301-03 3/32" 0.205 0.5 0.093 0.47 1.42 S.S T304 1.92
2343-03 3/32" 0.25 0.5 0.093 0.47 1.42 Z.P. Steel 1.88
2341-03 3/32" 0.25 0.5 0.093 0.47 1.42 S.S. T304 1.88
2323-03 3/32" 0.375 0.75 0.093 0.45 1.31 Z.P. Steel 2.04
2321-03 3/32" 0.375 0.75 0.093 0.45 1.31 S.S. T304 2.04
2333-03 3/32" 0.5 0.75 0.093 0.45 1.31 Z.P. Steel 1.81
2331-03 3/32" 0.5 0.75 0.093 0.45 1.31 S.S. T304 1.81
2403-04** 1/8" 0.25 0.58 0.125 0.58 1.95 Z.P. Steel 4.66
2401-04** 1/8" 0.25 0.58 0.125 0.48 1.95 S.S. T304 4.66
2413-04** 1/8" 0.316 0.58 0.125 0.58 1.95 Z.P. Steel 4.64
2411-04** 1/8" 0.316 0.58 0.125 0.48 1.95 S.S. T304 4.64
2423-04 1/8" 0.375 0.85 0.125 0.85 1.84 Z.P. Steel 4.92
2421-04 1/8" 0.375 0.85 0.125 0.54 1.84 S.S. T304 4.92
2433-04 1/8" 0.5 0.85 0.125 0.85 1.84 Z.P. Steel 4.56
2431-04 1/8" 0.5 0.85 0.125 0.54 1.84 S.S. T304 4.56
2433-04-547 1/8" 0.547 0.85 0.125 0.54 1.84 Z.P. Steel 4.56
2434-04 1/8" 0.343 0.85 0.125 0.54 1.84 Z.P. Steel 4.56
340-P-313 5/32 - 3/16" 0.313 1 0.19 0.63 2-3/8 Z.P. Steel N/A
340-S-313 5/32 - 3/16" 0.313 1 0.19 0.63 2-3/8 S.S. T304 N/A
340-P-380 5/32 - 3/16" 0.38 1 0.19 0.63 2-3/8 Z.P. Steel N/A
340-S-380 5/32 - 3/16" 0.38 1 0.19 0.63 2-3/8 S.S T304 N/A
340-P-500 5/32 - 3/16" 0.501 1 0.19 0.63 2-3/8 Z.P. Steel N/A
340-S-500 5/32 - 3/16" 0.501 1 0.19 0.63 2-3/8 S.S T304 N/A
350-P-510 1/4" 0.512 1.25 0.25 0.75 2-7/8 Z.P. Steel N/A
350-S-510 1/4" 0.512 1.25 0.25 0.75 2-7/8 S.S T304 N/A
350-P-635 1/4" 0.635 1.25 0.25 0.75 2-7/8 Z.P. Steel N/A
350-S-635 1/4" 0.635 1.25 0.25 0.75 2-7/8 S.S T304 N/A
  Results 1 - 50 of 50 1