COMPANY HEADER
Print Back
Warning: Stamped eyelets must be assembled with a mechanical or hydraulic swager using properly designed dies.
The below holding strengths are based on 7x7 and 7x19 construction.
A pull test should be performed to determine the holding strength of the applied eye, and suitability for your application.

These stamped eye ends are designed to be crimped on to wire rope or aircraft cable.
-12_eyelet
Unit of Measure
1 2 

Item #

To Fit Wire Rope Dia (in)

A Pin Hole (in)

B (in)

C (in)

D (in)

E (in)

Material Type

Wt/100 pcs (lbs)

2341-03 N/A 3/32" N/A 0.25 N/A 0.5 N/A 0.093 N/A 0.47 N/A 1.42 N/A S.S. T304 N/A 1.88
2323-03 N/A 3/32" N/A 0.375 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A Z.P. Steel N/A 2.04
2321-03 N/A 3/32" N/A 0.375 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A S.S. T304 N/A 2.04
2333-03 N/A 3/32" N/A 0.5 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A Z.P. Steel N/A 1.81
2331-03 N/A 3/32" N/A 0.5 N/A 0.75 N/A 0.093 N/A 0.45 N/A 1.31 N/A S.S. T304 N/A 1.81
2403-04** N/A 1/8" N/A 0.25 N/A 0.58 N/A 0.125 N/A 0.58 N/A 1.95 N/A Z.P. Steel N/A 4.66
2401-04** N/A 1/8" N/A 0.25 N/A 0.58 N/A 0.125 N/A 0.48 N/A 1.95 N/A S.S. T304 N/A 4.66
2413-04** N/A 1/8" N/A 0.316 N/A 0.58 N/A 0.125 N/A 0.58 N/A 1.95 N/A Z.P. Steel N/A 4.64
2411-04** N/A 1/8" N/A 0.316 N/A 0.58 N/A 0.125 N/A 0.48 N/A 1.95 N/A S.S. T304 N/A 4.64
2423-04 N/A 1/8" N/A 0.375 N/A 0.85 N/A 0.125 N/A 0.85 N/A 1.84 N/A Z.P. Steel N/A 4.92
2421-04 N/A 1/8" N/A 0.375 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A S.S. T304 N/A 4.92
2433-04 N/A 1/8" N/A 0.5 N/A 0.85 N/A 0.125 N/A 0.85 N/A 1.84 N/A Z.P. Steel N/A 4.56
2431-04 N/A 1/8" N/A 0.5 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A S.S. T304 N/A 4.56
2433-04-547 N/A 1/8" N/A 0.547 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A Z.P. Steel N/A 4.56
2434-04 N/A 1/8" N/A 0.343 N/A 0.85 N/A 0.125 N/A 0.54 N/A 1.84 N/A Z.P. Steel N/A 4.56
340-P-313 N/A 5/32 - 3/16" N/A 0.313 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A Z.P. Steel N/A
340-S-313 N/A 5/32 - 3/16" N/A 0.313 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A S.S. T304 N/A
340-P-380 N/A 5/32 - 3/16" N/A 0.38 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A Z.P. Steel N/A
340-S-380 N/A 5/32 - 3/16" N/A 0.38 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A S.S T304 N/A
340-P-500 N/A 5/32 - 3/16" N/A 0.501 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A Z.P. Steel N/A
340-S-500 N/A 5/32 - 3/16" N/A 0.501 N/A 1 N/A 0.19 N/A 0.63 N/A 2-3/8 N/A S.S T304 N/A
350-P-510 N/A 1/4" N/A 0.512 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A Z.P. Steel N/A
350-S-510 N/A 1/4" N/A 0.512 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A S.S T304 N/A
350-P-635 N/A 1/4" N/A 0.635 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A Z.P. Steel N/A
350-S-635 N/A 1/4" N/A 0.635 N/A 1.25 N/A 0.25 N/A 0.75 N/A 2-7/8 N/A S.S T304 N/A
Unit of Measure
1 2