Print Back

This non-tensioning fitting is used for stairways and angled runs. A Threaded Tab is included with this Eye Fitting Assembly. Posts must be drilled and tapped to incorporate the threaded tab. This fitting can only be used when a minimum wall thickness of .250 is maintained. The hole must be drilled with an offset of 1/4"" to maintain axial alignment for the threaded tab.

These fixed eyes are designed to be installed on to wire rope or aircraft cable.

CE-418-THD
Unit of Measure
1 

Item #

Rope Size

A

B

C

D

E

CE-218-THD N/A 3/16 N/A 3/8" N/A 1/2" N/A 2-7/16" N/A 1/4"-28 N/A 15/64"
CE-225-THD N/A 1/4 N/A 7/16" N/A 5/8" N/A 3" N/A 5/16"-24 N/A 15/64"
Unit of Measure
1