Part# |
N/A 2608 |
Wire Rope Dia |
N/A 1 1/2 |
Strand Dia. (in) |
N/A 1 5/16 - 1 3/8 |
Std. Take-Up |
N/A 12 |
A T/U Std. |
N/A 30 |
A T/U 48" |
N/A 66 |
A T/U 72" |
N/A 90 |
A T/U 84" |
N/A 102 |
A T/U 96" |
N/A 114 |
B |
N/A 2 1/2 |
C |
N/A 7 3/16 |
d |
N/A 1 3/4 |
D |
N/A 3 1/16 |
J |
N/A 6 7/16 |
K |
N/A 5 1/4 |
N |
N/A 2 3/8 |
TH T/U Std. |
N/A 15 3/4 |
TH T/U 48" |
N/A 51 3/4 |
TH T/U 72" |
N/A 75 3/4 |
TH T/U 84" |
N/A 87 3/4 |
TH T/U 96" |
N/A 99 3/4 |
Q |
N/A 1 5/8 |
S |
N/A 10 7/16 |
Wt. T/U Std. |
N/A 124 |
Wt. T/U 48" |
N/A 173 |
Wt. T/U 72" |
N/A 189 |
Wt. T/U 84" |
N/A 207 |
Wt. T/U 96" |
N/A 223 |
Material Specification
Sockets up to 4" are ASTM A148 steel, grade 105/85
Sockets above 4" are ASTM A148 steel, grade 115/95
All sockets are magnetic particle inspected at critical areas and proof tested on special order
Tolerances
Dimensions under 4": + 1/8"
Dimensions over 4": + 1/4"
Q (smaller sizes): + 1/32"
D: +0 - 1/32" in a self-colored socket
Note
Dimensions and tolerances shown are prior to galvanize
Cast Sockets are available for use in extreme temperatures; these must be special ordered. * A T/U = A for Take-Up
* E T/U = E for Take-Up
* TH T/U = E for Take-Up
* Wt. T/U = Wt. (lbs) Take-Up
These closed bridge spelter sockets are designed to be installed on to wire rope or aircraft cable.
Sockets up to 4" are ASTM A148 steel, grade 105/85
Sockets above 4" are ASTM A148 steel, grade 115/95
All sockets are magnetic particle inspected at critical areas and proof tested on special order
Tolerances
Dimensions under 4": + 1/8"
Dimensions over 4": + 1/4"
Q (smaller sizes): + 1/32"
D: +0 - 1/32" in a self-colored socket
Note
Dimensions and tolerances shown are prior to galvanize
Cast Sockets are available for use in extreme temperatures; these must be special ordered. * A T/U = A for Take-Up
* E T/U = E for Take-Up
* TH T/U = E for Take-Up
* Wt. T/U = Wt. (lbs) Take-Up
These closed bridge spelter sockets are designed to be installed on to wire rope or aircraft cable.
