Unit of Measure
Dia (in) |
N/A 1/2 |
Dia (mm) |
N/A 12.7 |
Weight (kg/m) |
N/A 0.79 |
Weight (lb/ft) |
N/A 0.53 |
MBS-1960 Grade (lbs) |
N/A 29000 |
Construction |
N/A 19x19 |
Material |
N/A
Bright |
- Compact 19 strands have a flattened strand surface giving to a wider contact area between sheave and rope which increases the resistance to abrasian.
- Compact 19P is suitable for lifting height application with semi rotation resistance.
- Compact 19P has a plastic layer between the inner strands and outer strands and all strands are compacted.
- The steel plastic combination increases structual stability.
- Compact 19P is fully lubricated and made out of galvanized or ungalvanized wires.
- Compact 19P more
- Compact 19 strands have a flattened strand surface giving to a wider contact area between sheave and rope which increases the resistance to abrasian.
- Compact 19P is suitable for lifting height application with semi rotation resistance.
- Compact 19P has a plastic layer between the inner strands and outer strands and all strands are compacted.
- The steel plastic combination increases structual stability.
- Compact 19P is fully lubricated and made out of galvanized or ungalvanized wires.
- Compact 19P is suitable for multi-layer spooling.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
less
