Unit of Measure
Wire Size |
N/A 5/32 " |
A |
N/A 3-1/4 " |
B |
N/A 1-1/2 " |
C |
N/A 11/16 " |
D |
N/A 1/4 " |
E |
N/A 1/4 " |
F |
N/A 5/8 " |
| Before Swage Dia.1 | N/A 0.297 " |
| After Swage Dia.2 | N/A 0.250 " |
Safe Working Load |
N/A 1000 lbs |
Note |
N/A Before and After swage dimensions are mil spec and conform to both our life line and rigging fittings with regard to all aspects except cable depth in fittings. (See chart on page 64.) The primary difference between life line and rigging fittings is the cable depth, although other factors exist. Always use rigging fittings when in doubt or wherever high load applications exist. Never exceed the safe working load. |
- 1 All tolerances are: +.000 - .005 Dimensions shown are inches.
- 2 All tolerances are: +.000 - .005 Dimensions shown are inches.
Toggle Jaw for Machine Swag
This fitting’s universal toggle action prevents any adverse bending of wire. Pins included.
These marine toggle jaws are designed to be crimped on to wire rope or aircraft cable.
Relevant Items
