Dia (in)

N/A 3 1/2

Class A Coating Throughout

N/A 555

Class A Coating Inner Wires/ Class B Coating Outer Wires

N/A 545

Class A Coating Inner Wires/ Class C Coating Outer Wires

N/A 534

Class C Coating Throughout

N/A 504

Approx. Gross Metalic Area (in2)

N/A 5.83

Weight (lb/ft)

N/A 21
Minimum breaking strength in tons of 2000 lbs Actual strand construction varies by diameter.
For example, 3/8-3/4"" is typically 7x7, 1"" is typically 6x25.

Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.