Dia (in) |
N/A 2 1/2 |
Grade 1 Class A coating Throughout |
N/A 376.0 |
Grade 1 Class A Coating Inner Wires/ Class B Coating Outer Wires |
N/A 370.0 |
Grade 1 Class A Coating Inner Wires/ Class C Coating Outer Wires |
N/A 365.0 |
Grade 2 Class A Coating Throughout |
N/A 432.0 |
Approx. Gross Metalic Area (in2) |
N/A 3.750 |
Weight (lb/ft) |
N/A 13.13 |
Minimum breaking strength in tons of 2000 lbs.
Actual strand construction varies by size.
For example, 1/2-1"" is 1x19.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
Actual strand construction varies by size.
For example, 1/2-1"" is 1x19.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
