Classic & Shortie Turnbuckles
classic-shortie-turnbuckles
Note: 5/32"" cable size available. /Asset/ball end shorty.png
If "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/lag-and-swage-stud-turnbuckle.png
Machined & Stamped Stainless Steel Type 316
If "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/Jaw-and-Swage-Stud-Turnbuckle.JPG
If "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/machined-fork-and-swage-stud-turnbuckle.png
*HAND SWAGE
If "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/threaded-rod-and-swage-stud-turnbuckle.png
Classic Jaw Turnbuckle
(19) A railing assembly may have a conventional turnbuckle on one end and any end fitting on the opposite end. /Asset/Classic-Toggle-Jaw-TB.JPG Classic Deck Toggle Turnbuckle
(12) A railing assembly may have a conventional turnbuckle on one end and any end fitting on the opposite end. /Asset/Classic-Deck-Toggle-Turnbuckle.jpg Classic Ball End Turnbuckle
(5) A railing assembly may have a conventional turnbuckle on one end and any end fitting on the opposite end. /Asset/Classic-Ball-End-TB.jpg Stanchion Terminal Turnbuckle
(5) A railing assembly may have a conventional turnbuckle on one end and any end fitting on the opposite end. /Asset/Button.JPG
Shortie Ball End Turnbuckle
(4) Shortie ball end and swage turnbuckles are made to accept the angles of stairways. The ball end allows the turnbuckle to integrate itself to your desired angle. The ball allows this turnbuckles to gimbal in its mount.Note: 5/32"" cable size available. /Asset/ball end shorty.png
Shortie Swage to Swage Turnbuckle
(4) Appearing in the middle of the cable, the shortie swage to swage turnbuckle needs a fitting at each end to make a complete assembly. You need to use three fittings per cable run, but it makes for a distinctive look. /Asset/swage to swage shorty.png Shortie Jaw Turnbuckle
(4) Shortie jaw and swage turnbuckles are an excellent choice for a wide variety of applications. A clevis pin in the jaw attaches to eyes, tabs, or in a channel. Can be used in straight run or at an angle. /Asset/jaw shorty.png Shortie Deck Toggle Turnbuckle
(4) Shortie deck toggle and swage turnbuckles can be mounted to any flat surface and is held in place by two tabs suitable for through bolting. The deck toggle can articulate 140 degrees. /Asset/deck toggle shorty.png Shortie Button Turnbuckle
(4) The shortie button and swage turnbuckle must be used on a straight run and attached in a through hole with the button on the backside of the baluster. /Asset/button shorty.png Lag & Swage Stud Turnbuckles Stainless Steel
(7) * HAND SWAGE.If "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/lag-and-swage-stud-turnbuckle.png
Fixed Jaw & Swage Stud Turnbuckles Stainless Steel
(14) * HAND SWAGEMachined & Stamped Stainless Steel Type 316
If "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/Jaw-and-Swage-Stud-Turnbuckle.JPG
Machined Fork & Swage Stud Turnbuckles Stainless Steel
(7) * HAND SWAGEIf "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/machined-fork-and-swage-stud-turnbuckle.png
Threaded Rod & Swage Stud Turnbuckles Stainless Steel
(14) END STOP IS NOT INCLUDED*HAND SWAGE
If "HS" appears in the part number then the turnbuckle may be crimped with a properly designed hand tool otherwise a roller or machine crimp is required. /Asset/threaded-rod-and-swage-stud-turnbuckle.png
