Eye Nuts
        ble-fittings-hardware-structural-hardware-eye-nuts
        
                
                     
                    
NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.
Drilled & Tapped Stainless Steel Type 316 /Asset/16505 1.jpg
                
                     
                    
NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.
Blank: Self-Colored
Drilled & Tapped: Self-Colored or Hot Galvanized /Asset/Drop-Forged-Eye-Nut-Made-In-USA.JPG
                
                     
                    
NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.
Item #s represent Stock #s /Asset/17005 5.jpg
                
            
        
        
                
            
        
    
    
                    Drop Forged Eye Nuts SS
(6) Stock Eye Nuts listed below, other than Blanks, are drilled and tapped standard regardless of finish. Both types drilled only, with special tapping or finish supplied to specification. Loads are based on a safety factor of 5 to 1. Blanks are self-colored.NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.
Drilled & Tapped Stainless Steel Type 316 /Asset/16505 1.jpg
Drop Forged Eye Nuts - Regular Self-Colored or Hot Galvanized
(27) Stock Eye Nuts listed below, other than Blanks, are drilled and tapped standard regardless of finish. Both types drilled only, with special tapping or finish supplied to specification. Loads are based on a safety factor of 5 to 1. Blanks are self-colored.NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.
Blank: Self-Colored
Drilled & Tapped: Self-Colored or Hot Galvanized /Asset/Drop-Forged-Eye-Nut-Made-In-USA.JPG
 
                    Drop Forged Heavy Duty Eye Nuts Blank or Drilled & Tapped Self-Colored
(18) Stock Eye Nuts listed below, other than Blanks, are drilled and tapped standard regardless of finish. Both types drilled only, with special tapping or finish supplied to specification. Loads are based on a safety factor of 5 to 1. Self-colored finish is standard.NOTE: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud.
Item #s represent Stock #s /Asset/17005 5.jpg


