Print Back
Same as our regular Fixed Jaw, except the cable attaches to the Fixed Jaw with a special clip, which is installed by hand. All hardware is swaged on the cable at the factory, so there is no field swaging necessary. Use on the opposite end of an Invisiware® receiver or Adjust-A-Jaw® tensioner. Order using part numbers below and check with factory to determine cable lengths to be provided with swaged fittings. Available for 1/8"" and 3/16"" cable only.
ultra-tec-fixed-jaw-2
Ultra-Tec---Clip-on-fixed-jaw-drawing
Unit of Measure
1 

Item #

Wire Rope Dia

Use with Ferrule No.

Use with screw No.

D Dia.

"E" Thread

G

K

L

F-JC2-4 N/A 1/8 " N/A F-4 N/A SC-6 N/A 0.260 " N/A 1/4-28 N/A 0.260 " N/A 0.56 " N/A 1.75 "
F-JC2-6 N/A 3/16 " N/A F-6 N/A SC-6 N/A 0.260 " N/A 1/4-28 N/A 0.260 " N/A 0.56 " N/A 1.75 "
Unit of Measure
1