Print Back

This non-tensioning fitting is used for stairways and angled runs. A Threaded Tab is included with this Eye Fitting Assembly. Posts must be drilled and tapped to incorporate the threaded tab. This fitting can only be used when a minimum wall thickness of .250 is maintained. The hole must be drilled with an offset of 1/4"" to maintain axial alignment for the threaded tab.

These fixed eyes are designed to be installed on to wire rope or aircraft cable.

CE-418-THD
Unit of Measure
Items CE-418-THD
CE-218-THD
Fixed Eye with Threaded Tab Assembly
CE-418-THD
CE-225-THD
Fixed Eye with Threaded Tab Assembly
Rope Size N/A 3/16 N/A 1/4
A N/A 3/8" N/A 7/16"
B N/A 1/2" N/A 5/8"
C N/A 2-7/16" N/A 3"
D N/A 1/4"-28 N/A 5/16"-24
E N/A 15/64"