Unit of Measure
Specifications
Bare Cable Diameter (in) |
N/A 1/32 |
Nylon OD (in) |
N/A 3/64 |
MBS (lbs) |
N/A 110 |
WT (lb/1000 ft) |
N/A 3.1 |
Nylon Color |
N/A Pink Transparent Blue Transparent Aqua Transparent Bronze Transparent Gold Transparent Magenta Transparent Red Black Clear |
Construction |
N/A 7x7 |
Material Type |
N/A Stainless steel |
Actual part number may differ depending on the color and special characteristics.
Please inform your Lexco Salesperson if you wish to quote MIL-Spec Natural Nylon MIL-DTL-83420.
Our standard nylon coatings are made with Nylon-6.
If you require high end performance nylon, please inquire about our Nylon-11 option.
**Commercial grade is NOT intended for aircraft use.
*Material origin is import unless requested otherwise.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
Please inform your Lexco Salesperson if you wish to quote MIL-Spec Natural Nylon MIL-DTL-83420.
Our standard nylon coatings are made with Nylon-6.
If you require high end performance nylon, please inquire about our Nylon-11 option.
**Commercial grade is NOT intended for aircraft use.
*Material origin is import unless requested otherwise.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
