Material Specification
• Sockets up to 4"" are ASTM A148 steel, grade 105-85
• Sockets above 4"" are ASTM A148 steel grade 115-95
• All sockets are magnetic particle inspected at critical areas and proof tested on special order.
Tolerances
• Dimensions under 4"": ± 1/16""
• Dimensions over 4"": ± 1/8""
• V and O dimensions: ± 1/8""
• Q (smaller sizes): ± 1/32""
• D: + 0 - 1/32""
Note
Dimensions and tolerances shown are prior to galvanize.
Cast Sockets are available for use in extreme temperatures; these must be special ordered.
* "M" dimensions do not include basket radius restrictions
These spelter sockets are designed to be installed on to wire rope or aircraft cable.
Rope Size (in) |
N/A 7/16 - 1/2 |
Dimensions (in) A |
N/A 5.56 |
Dimensions (in) J |
N/A 2.50 |
Dimensions (in) K |
N/A 1.00 |
Dimensions (in) M |
N/A 2.00 |
Dimensions (in) N |
N/A 1.06 |
Dimensions (in) O |
N/A 1.00 |
Dimensions (in) Q |
N/A 0.56 |
Dimensions (in) V |
N/A 0.50 |
Dimensions (in) Y |
N/A 1.88 |
Pin Length (in) |
N/A 2.62 |
Pin Dia. (in) |
N/A 1.00 |
Ultimate Load (Ton) |
N/A 21 |
Min. Socketing Media (CC) |
N/A 22 |
Weight Each (lbs) |
N/A 2.5 |
