Unit of Measure
Specifications
Clevis # |
N/A 5 |
D (in) |
N/A 5 |
N (in) |
N/A 2 1/4 |
U - Maximum Thread Tap (in) |
N/A 2 1/8 |
W (in) |
N/A 2 1/2 |
T (in) |
N/A 5/8 + 3/32-0 |
A (in) |
N/A 7 |
Pin Max. P (in) |
N/A 2 1/2 |
| WLL (lbs)1 | N/A 37,500 |
Wt. (lbs) |
N/A 16 |
Specify RH Thread or LH Thread |
N/A RH Thread LH Thread |
Specify Thread Pitch |
N/A UNC UNF |
Material Finish |
N/A Self-Colored Carbon Steel Zinc Plated Carbon Steel Galvanized Carbon Steel Untreated Stainless Steel |
- 1 WLL is based on 3:1 safety factor and max pin diameter.
Material: C-1035, SA-182-F-11, Stainless Steel
Threads: U.N.C./U.N.F. Class 2 B, Right or Left Hand, Metric
Finish: Self-Colored, Galvanized, Plated, Electro-Polished
Options: Other Alloys, Heat Treating, Special Threading
Note: Pins Sold Separately.
Tap, Grip & Pin specifications are custom.
WLL is based on 3:1 safety factor and max pin diameter.
Threads: U.N.C./U.N.F. Class 2 B, Right or Left Hand, Metric
Finish: Self-Colored, Galvanized, Plated, Electro-Polished
Options: Other Alloys, Heat Treating, Special Threading
Note: Pins Sold Separately.
Tap, Grip & Pin specifications are custom.
WLL is based on 3:1 safety factor and max pin diameter.
