Unit of Measure
- 1 Dimension A is with the lever in full “OFF” position. Use dimension A in calculating cable length.
- 2 Dimension B minimum is with the lever in full “ON” position and adjusted for minimum (CCW) travel. Use dimension B minimum during installation and initial adjustment. Turn knob (CW) to add travel and increase brake pressure setting.
- 3 Dimension B maximum is with the lever in full “ON” position and adjusted for maximum (CW) travel.
2.5 inches (64 mm) wide side plates; two cables. For cowl, instrument panel, seat riser or frame installation. Note: When considering load requirements, the load on the lever assembly will be the sum of the load in each cable.
Kit B835 - supplied with the following hardware:
Kit B835 - supplied with the following hardware:
- Clevis Pins (2)
- Cotter Pins (2)
- Washers (2)
- Mounting Spacers (2)
- Cable Clamps