Dia (in) |
N/A 7/16 |
Class A Coating Throughout |
N/A 8.8 |
Class A Coating Inner Wires/ Class B Coating Outer Wires |
N/A 8.5 |
Class A Coating Inner Wires/ Class C Coating Outer Wires |
N/A 8.2 |
Class C Coating Throughout |
N/A 8 |
Approx. Gross Metalic Area (in2) |
N/A 0.091 |
Weight (lb/ft) |
N/A 0.32 |
Minimum breaking strength in tons of 2000 lbs Actual strand construction varies by diameter.
For example, 3/8-3/4"" is typically 7x7, 1"" is typically 6x25.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
For example, 3/8-3/4"" is typically 7x7, 1"" is typically 6x25.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
