Part# |
N/A 2610 |
Wire Rope Dia |
N/A 1 7/8 - 2 |
Strand Dia. (in) |
N/A 1 9/16 - 1 3/4 |
Std. Take-Up |
N/A 15 |
A T/U Std. |
N/A 36 |
A T/U 48" |
N/A 69 |
A T/U 72" |
N/A 93 |
A T/U 84" |
N/A 105 |
A T/U 96" |
N/A 117 |
B |
N/A 3 5/32 |
C |
N/A 9 |
d |
N/A 2 1/4 |
D |
N/A 3 13/16 |
J |
N/A 8 1/8 |
K |
N/A 7 5/16 |
N |
N/A 2 13/16 |
TH T/U Std. |
N/A 19 3/4 |
TH T/U 48" |
N/A 52 3/4 |
TH T/U 72" |
N/A 76 3/4 |
TH T/U 84" |
N/A 88 3/4 |
TH T/U 96" |
N/A 100 3/4 |
Q |
N/A 2 1/4 |
S |
N/A 13 1/8 |
Wt. T/U Std. |
N/A 234 |
Wt. T/U 48" |
N/A 309 |
Wt. T/U 72" |
N/A 350 |
Wt. T/U 84" |
N/A 376 |
Wt. T/U 96" |
N/A 404 |
Material Specification
Sockets up to 4" are ASTM A148 steel, grade 105/85
Sockets above 4" are ASTM A148 steel, grade 115/95
All sockets are magnetic particle inspected at critical areas and proof tested on special order
Tolerances
Dimensions under 4": + 1/8"
Dimensions over 4": + 1/4"
Q (smaller sizes): + 1/32"
D: +0 - 1/32" in a self-colored socket
Sockets up to 4" are ASTM A148 steel, grade 105/85
Sockets above 4" are ASTM A148 steel, grade 115/95
All sockets are magnetic particle inspected at critical areas and proof tested on special order
Tolerances
Dimensions under 4": + 1/8"
Dimensions over 4": + 1/4"
Q (smaller sizes): + 1/32"
D: +0 - 1/32" in a self-colored socket
Note
Dimensions and tolerances shown are prior to galvanize
Cast Sockets are available for use in extreme temperatures; these must be special ordered. * A T/U = A for Take-Up
* E T/U = E for Take-Up
* TH T/U = E for Take-Up
* Wt. T/U = Wt. (lbs) Take-Up
These closed bridge spelter sockets are designed to be installed on to wire rope or aircraft cable.
Dimensions and tolerances shown are prior to galvanize
Cast Sockets are available for use in extreme temperatures; these must be special ordered. * A T/U = A for Take-Up
* E T/U = E for Take-Up
* TH T/U = E for Take-Up
* Wt. T/U = Wt. (lbs) Take-Up
These closed bridge spelter sockets are designed to be installed on to wire rope or aircraft cable.
