Lexco Cable Manufacturers - CM® Alloy Anchor Shackles

Meets performance requirements of federal specification: RR-C-271 Type IV A, Grade B. CM® Alloy Shackles are designed with a 5:1 design factor and have a strength rating approximately 50 % higher than a comparable-sized carbon shackle and about 25 % stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections.

Made in the USA.

Grade B alloy shackles are typically used on wire rope loops for lifting or towing.

Request Information Search by Specification

Unit of Measure

Items	M648A 3/8 Inch (in) Size D Self-Colored CM® Alloy Anchor Shackle with Screw Pin Request Quote	M848A 3/8 Inch (in) Size D Self-Colored CM® Alloy Anchor Shackle with Bolt, Nut & Cotter Request Quote	M648AG 3/8 Inch (in) Size D Galvanized CM® Alloy Anchor Shackle with Screw Pin Request Quote	M848AG 3/8 Inch (in) Size D Galvanized CM® Alloy Anchor Shackle with Bolt, Nut & Cotter Request Quote	M648AP 3/8 Inch (in) Size D Orange Powder Coated CM® Alloy Anchor Shackle with Screw Pin Request Quote
Description	N/A Meets performance requirements of federal specification: RR-C-271 Type IV A, Grade B. CM® Alloy Shackles are designed with a 5:1 design factor and have a strength rating approximately 50 % higher than a comparable-sized carbon shackle and about 25 % stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections. Made in the USA. Grade B alloy shackles are typically used on wire rope loops for lifting or towing.
Size D	N/A 3/8 "
WLL	N/A 2 ton
Standard Package	N/A 50
Weight	N/A 0.30 lb
Style	N/A Screw Pin	N/A Bolt, Nut & Cotter	N/A Screw Pin	N/A Bolt, Nut & Cotter	N/A Screw Pin
Finish	N/A Self-Colored	N/A Self-Colored	N/A Galvanized	N/A Galvanized	N/A Orange Powder Coated
Dimension P	N/A 0.44 "
E	N/A 0.52 "
Dimension W	N/A 0.66 "
Dimension R	N/A 1.00 "
Dimension L	N/A 1.40 "
Minimum Dimension B	N/A 1.00 "
Benefits and Features	N/A Made of Special Bar Quality (SBQ) steel having fine grain, reduced sulfur and phosphorus. Shackles show major deformation before failure. Working load limit and traceability codes shown as permanent markings on body. All shackles have alloy quenched and tempered pins. Available in sizes 3/8" to 3". Available finishes include powder coated, galvanized or self-colored. Shackles meet dimensional and performance requirements of RR-C-271. Special testing and certification is available upon request at the time of the order. CM® Smart ID RFID technology is available as an option on screw pin anchor shackles sizes 1/2" to 1-3/4" and bolt, nut & cotter shackles sizes 3/4" to 1-3/4".
Note	N/A To order products with CM® Smart ID RFID technology add "-RF" after the product number. RFID-equipped rigging products are not eligible for our In-Stock Guarantee.
Material	N/A Alloy