MIL-DTL-87161 Type I, Comp B
Mil-Spec Wire Rope
Type I, Comp B
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
Warning: Wire rope & aircraft cable should never be used at breaking strength. 10:1 safety factor minimum is recommended for critical/overhead application. Do not use for overhead lifting without consulting a wire rope rigging professional. End fittings may not hold to 100% of strength efficiency so a safety factor such as 5:1 should be divided into the assembly actual strength. A pull test is recommended for quality assurance.
Unit of Measure
Items |
/Asset/1x7_Uncoated.JPG M87161/2-001 MIL-DTL-87161 Type I, Comp B |
/Asset/1x7_Uncoated.JPG M87161/2-002 MIL-DTL-87161 Type I, Comp B |
/Asset/1x7_Uncoated.JPG M87161/2-003 MIL-DTL-87161 Type I, Comp B |
/Asset/1x7_Uncoated.JPG M87161/2-004 MIL-DTL-87161 Type I, Comp B |
/Asset/1x7_Uncoated.JPG M87161/2-005 MIL-DTL-87161 Type I, Comp B |
|||||
Dia (in) | N/A 1/32 | N/A 1/32 | N/A 3/64 | N/A 3/64 | N/A 1/16 | |||||
Construction | N/A 1x7 | |||||||||
Material | N/A Stainless Steel | |||||||||
Lay | N/A Right | N/A Left | N/A Right | N/A Left | N/A Right | |||||
Specification | N/A MIL-DLT-87161 Type 1 Comp B, Construction 1 | N/A MIL-DLT-87161 Type 1 Comp B, Construction 2 | N/A MIL-DLT-87161 Type 1 Comp B, Construction 1 | N/A MIL-DLT-87161 Type 1 Comp B, Construction 2 | N/A MIL-DLT-87161 Type 1 Comp B, Construction 1 | |||||
|