• CAN BE USED IN ARCHITECTURAL FEATURES AS A WIRE CLAMP OR IN SHELVING SYSTEMS AS A STOP CLAMP.
• SIMPLE DESIGN OFFERS A CLEAN, CONTEMPORARY LOOK.
• PRODUCT SHOULD NEVER BE USED IN LIFTING APPLICATIONS.

• MAY BE USED ONLY FOR WIRE ROPE GUIDANCE PURPOSES (NOT AS AN END CONNECTOR).
• CAN BE USED IN ARCHITECTURAL APPLICATIONS SUCH AS TRELLIS SYSTEMS OR TO FORM WIRE NETTING.
• FITTING CAN BE THREADED ON TO SURFACE ANCHOR BOLT.

• MAY BE USED ONLY FOR WIRE ROPE GUIDANCE PURPOSES (NOT AS AN END CONNECTOR).
• CAN BE USED IN ARCHITECTURAL APPLICATIONS SUCH AS TRELLIS SYSTEMS OR TO FORM WIRE NETTING.

Cable grommets are offered for popular cable diameters of 1/8", 3/16" and 1/4". They help prevent rust inexterior applications or elsewhere where moisture is a factor, by providing a barrier between the cable and the painted or powder-coated surface through which the cable is drawn when being installed. Ultra-tec cable grommets are installed (after the paint or powder coating is applied) into holes in intermediate posts, cable braces and, in the case of the Inisiware Radius Ferrule, Push-Lock, and Pull-Lock fittings into the end post holes through which the calbe exits. They are offered in black UV resistant Delrin®.

Commercial Pre-Tensioner is recommended to be used when installing cable with lengths longer than 70’ and threading through multiple posts. This tool allows you to pretension the cable at an intermediate post location. Use the gauge to guide the cable tension.