Warning: Stamped eyelets must be assembled with a mechanical or hydraulic swager using properly designed dies.
The below holding strengths are based on 7x7 and 7x19 construction.
A pull test should be performed to determine the holding strength of the applied eye, and suitability for your application.

These stamped eye ends are designed to be crimped on to wire rope or aircraft cable.

• One piece, Nickel Plated Steel for protection.
• Non-load bearing. Typically for electrical applications but can used for light-duty mechanical applications.

These ring terminal are designed to be crimped on to wire rope or aircraft cable.

These eye ends are designed to be crimped on to wire rope or aircraft cable.

These eye ends are designed to be crimped on to wire rope or aircraft cable.

Machine or roller swage is required

These marine eye ends are designed to be crimped on to wire rope or aircraft cable.

Closed Swage Sockets Carbon
EFFICIENT, QUICK and POSITIVE
Why pour zinc or epoxy when swaging is sure? Swage sockets have as much as five times longer life than spelter sockets.

Tests prove swage sockets have the best fatigue life The below part numbers are for self colored carbon steel, but zinc plated and galvanized finishes are available upon special request.

These closed swage carbon sockets  are designed to be crimped on to wire rope or aircraft cable.

Swage sockets are recommended for use on 6x19 or 6x37 IWRC regular lay ropes. They are also satisfactory on galvanized bridge rope. They are not recommended for use on fiber core or lang lay ropes.
Before using sockets with other type lay, construction or grade of wire rope, it is recommended that the termination be proofloaded to prove the adequacy of the assembly.

These closed stainless steel swage sockets are designed to be crimped on to wire rope or aircraft cable.

Pin Eye Terminals - Drop-Forged Steel from C-1035 special bar quality steel, self-colored. Plating, galvanizing, and stainless steel are available. Call for price breaks. MADE IN USA.

These pin eye end terminals are designed to be crimped on to wire rope or aircraft cable.

This product is carbon steel and can be quoted with a zinc plated or galvanized finish upon special request.
Note: Schematics & specifications listed are taken from crimped ring eyes.

These ring eye ends are designed to be crimped on to wire rope or aircraft cable.

Strap, Eye End -- Mil Spec. NAS1435-E
Please indicate if you need commercial grade or military grade when ordering. The “SP” part number is for commercial grade and the “NAS1435” part number is for military grade.

These strap eye ends are designed to be crimped on to wire rope or aircraft cable.

Material: Steel
Yellow Zinc plating

These closed strap clevises are designed to be crimped on to wire rope or aircraft cable.