Drop forged heat treated steel eye bolts supplied as standard with hot galvanized finish. Machine thread eye bolts are threaded National Course before galvanizing and assembled with hex nuts tapped oversize. Loads are based on a safety factor of 5 to 1. When tested all eye bolts are pulled at a uniform rate of speed in a direct tension.

Warning: Any deviations such as angular lifts, shock loads, modification of the basic forging, etc., will result in drastically reduced working load limits.

Special shank and thread lengths are also available.

These drop forged machine threaded eye bolts are designed to be attached to a cable assembly via the open eye end or the threaded end stud.

Drop forged heat treated steel eye bolts supplied as standard with hot galvanized finish. Machine thread eye bolts are threaded National Course before galvanizing and assembled with hex nuts tapped oversize. Loads are based on a safety factor of 5 to 1. When tested all eye bolts are pulled at a uniform rate of speed in a direct tension.

Warning: Any deviations such as angular lifts, shock loads, modification of the basic forging, etc., will result in drastically reduced working load limits.

Special shank and thread lengths are also available.

These drop forged machine threaded eye bolts are designed to be attached to a cable assembly via the open eye end or the threaded end stud.

Screw eye bolts supplied with cone points - lag screw thread.

These screw thread eye bolts are designed to be attached to a cable assembly via the open eye end or the lag screw thread.

Screw eye bolts supplied with cone points - lag screw thread.

These screw thread eye bolts are designed to be attached to a cable assembly via the open eye end or the lag screw thread.

Ring bolts are only available in hot galvanized finish. Eye bolts are drop forged steel.

Ring dimensions are shown in table below.

Eye bolt specifications are identical to those shown for "Drop Forged Eye Bolts - Regular - Machine Thread"

Ring Bolts are Welded and NOT TO BE USED FOR LIFTING APPLICATIONS.

These drop forged ring eye bolts are designed to be attached to a cable assembly via the ring end or the threaded end.

Ring bolts are only available in hot galvanized finish. Eye bolts are drop forged steel.

Ring dimensions are shown in table below.

Eye bolt specifications are identical to those shown for "Drop Forged Eye Bolts - Shoulder - Machine Thread"

Ring Bolts are Welded and NOT TO BE USED FOR LIFTING APPLICATIONS.

These drop forged ring eye bolts are designed to be attached to a cable assembly via the ring end or the threaded end.

Ring bolts are only available in hot galvanized finish. Eye bolts are drop forged steel.

Ring dimensions are shown in table below.

Eye bolt specifications are identical to those shown for "Screw Thread Eye Bolts - Regular"

Ring Bolts are Welded and NOT TO BE USED FOR LIFTING APPLICATIONS.

These drop forged ring & screw  thread eye bolts are designed to be attached to a cable assembly via the ring end or the threaded end.

Ring bolts are only available in hot galvanized finish. Eye bolts are drop forged steel.

Ring dimensions are shown in table below.

Eye bolt specifications are identical to those shown for "Screw Thread Eye Bolts - Shoulder"
Ring Bolts are Welded and NOT TO BE USED FOR LIFTING APPLICATIONS.

These drop forged ring & screw thread eye bolts are designed to be attached to a cable assembly via the ring end or the threaded end.

Maximum blank lengths, either pattern indicated in last column. Vertical loads are based on a safety factor of 5 to 1. Variation in quantity: on special items we reserve the right to a maximum 10% variation for allowances in manufacture.

Item #s represent Chicago Hardware Stock #

These machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Maximum blank lengths, either pattern indicated in last column. Vertical loads are based on a safety factor of 5 to 1. Variation in quantity: on special items we reserve the right to a maximum 10% variation for allowances in manufacture.

Item #s represent Chicago Hardware Stock #

These machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Click Here for Click Here for Additional Specifications and Dimensions

These machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Click Here for Additional Specifications & Dimensions

These machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Drop forged steel. Heat treated after forging. Self-colored, zinc plated, or hot galvanized. Plain or shoulder type, blank or threaded. Threaded will be supplied unless otherwise specified.

Click Here for Additional specifications and dimensions

These machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Drop forged steel. Heat treated after forging. Self-colored, zinc plated, or hot galvanized. Plain or shoulder type, blank or threaded. Threaded will be supplied unless otherwise specified.

Click Here for Additional specifications and dimensions

These machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

These zinc plated machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

These zinc plated machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

These galvanized plated machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Variation in quantity: on special items we reserve the right to a maximum 10% variation for allowances in manufacture.

Additional special shank lengths available upon request.

Click Here for Additional Specifications and Dimensions

These machinery eye bolts with special shank length are designed to be attached to a cable assembly via the eye end or the threaded end.

Variation in quantity: on special items we reserve the right to a maximum 10% variation for allowances in manufacture.

Additional special shank lengths available upon request.

Item #s represent Bolt Diameter N.C.

Click Here for Additional Specifications and Dimensions

These machinery eye bolts with special shank length are designed to be attached to a cable assembly via the eye end or the threaded end.

Dimensions in Millimeters - Some Sizes Available in Stainless Steel on a Special Basis.

These metric machinery eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Click Here for Additional Dimensional Information

These turned eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Turned Eye Bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut un assembled.
Zinc plated finish is standard; other rust preventive finishes or self-colored available on a special basis.
When it is not feasible to utilize a standard eye bolt, we can manufacture to your specifications.

Standard Pack:
A-1 through D-1: 50 Pieces
E-1 through J-5: 10 Pieces

These zinc plated turned eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.

Lag Screws Threaded Turned Eye Bolts are comparable in steel specification, finish and packaging to Machine Thread Turned Eye Bolts.
Lag screw threads are rolled to fit standard anchors and shields and supplied with gimlet point.

Standard Pack 10 - Pieces

These zinc plated turned eye bolts lag threads are designed to be attached to a cable assembly via the eye end or the threaded end.

Comparable in specifications, finish and standard packaging with exception Eyes are resistance welded closed.

Standard Pack - 10 Pieces

These zinc plated turned eye bolts wleded are designed to be attached to a cable assembly via the eye end or the threaded end.

Drop forged from C-1035 steel, heat treated. Available blank or threaded. Self-colored finish is standard; hot galvanized or other finishes supplied on a special basis. Used in lifting applications where larger eyes are required. When ordering prefix stock number with letter "B" (blank) or "T" (threaded) as required. Loads are based on a safety factor of 5 to 1. Working loading limits for lifting eyes are based on a straight vertical lift in a gradually increasing manner, and should never be used for angular lifts.

Item #s represent Stock #s

These lifting eye bolts are designed to be attached to a cable assembly via the eye end or the threaded end.