These steel sleeves are designed to be crimped onto a wire rope or aircraft cable.

These steel sleeves are designed to be crimped onto a wire rope or aircraft cable.

These aluminum sleeves are designed to be crimped onto a wire rope or aircraft cable.

These fiber rope sleeves are designed to be crimped onto a wire rope or aircraft cable.

These copper sleeves are designed to be crimped onto a wire rope or aircraft cable.

These zinc plated copper sleeves are designed to be crimped onto a wire rope or aircraft cable.

These tin coated  copper sleeves are designed to be crimped onto a wire rope or aircraft cable.

CAUTION: Proper swaging practices are the sling manufacturers responsibility. A color change will not indicate proper swaging.
The below part numbers are for zinc plated steel. Additionally self colored steel is available for sizes 3/4"" and up.

These carbon steel sleeves are designed to be crimped onto a wire rope or aircraft cable.

These stainless steel sleeves are designed to be crimped onto a wire rope or aircraft cable

Caution: Flemish Eye Stainless Steel Sleeves are recommended for use on 6 x 19 or 6 x 37 IPS or XIP, EIP, RRL, FC, or IWRC wire rope. Proper swaging practices are the sling manufacturer's responsibility. Before using sleeves with other type lay, construction, or grade of wire rope, or strand, it is recommended that a test assembly be destructively tested to prove the adequacy of the assembly.

These stainless steel sleeves are designed to be crimped onto a wire rope or aircraft cable

Caution: One-Piece Stainless Steel Duplex Sleeves are recommended for use on 6 x 19 or 6 x 37 IPS or XIP, EIP, RRL, or IWRC wire rope. It is recommended that the termination be proof loaded to prove the adequacy of the assembly.

These stainless steel sleeves are designed to be crimped onto a wire rope or aircraft cable

Caution: Carbon Steel Turnback Sleeves are recommended for use on 6 x 19 or 6 x 37 IPS or XIP, EIP, RRL, or IWRC wire rope. It is recommended that the termination be proof loaded to prove the adequacy of the assembly.

These carbon steel sleeves are designed to be crimped onto a wire rope or aircraft cable