Stamped Eyelets
Eye Ends
Warning: Stamped eyelets must be assembled with a mechanical or hydraulic swager using properly designed dies.
The below holding strengths are based on 7x7 and 7x19 construction.
A pull test should be performed to determine the holding strength of the applied eye, and suitability for your application.
These stamped eye ends are designed to be crimped on to wire rope or aircraft cable.
Unit of Measure
Items |
/Asset/-12_eyelet.jpg 305-S-142 Stamped Eyelets |
/Asset/-12_eyelet.jpg 2083-01.5 Stamped Eyelets |
/Asset/-12_eyelet.jpg 2081-01.5 Stamped Eyelets |
/Asset/-12_eyelet.jpg 2023-01.5 Stamped Eyelets |
/Asset/-12_eyelet.jpg 2021-01.5 Stamped Eyelets |
|||||
A Pin Hole (in) | N/A .142 | N/A 0.16 | N/A 0.16 | N/A 0.19 | N/A 0.19 | |||||
B (in) | N/A 0.260 | N/A 0.32 | N/A 0.32 | N/A 0.32 | N/A 0.32 | |||||
C (in) | N/A 0.040 | N/A 0.06 | N/A 0.06 | N/A 0.06 | N/A 0.06 | |||||
D (in) | N/A 0.150 | N/A 0.315 | N/A 0.315 | N/A 0.315 | N/A 0.315 | |||||
E (in) | N/A 0.580 | N/A 0.715 | N/A 0.715 | N/A 0.715 | N/A 0.715 | |||||
Max. Holding Strength (lbs) | N/A 85 | N/A 200 | N/A 200 | N/A 200 | N/A 200 | |||||
Wt/100 pcs (lbs) | N/A 0.12 | N/A 0.38 | N/A 0.38 | N/A 0.35 | N/A 0.35 | |||||
As REF. | N/A | |||||||||
|