These fork ends are designed to be crimped on to wire rope or aircraft cable.

Stainless Steel T316
Formed & Machined
Machine or roller swage is required
(Hand swage models available for 1/8"" & 3/16"")

These swage jaw ends are designed to be crimped on to wire rope or aircraft cable.

Stainless Steel T316
Machined
Machine or roller swage is required
Hand swage models available for 1/8" & 3/16"

These swage toggle jaws are designed to be crimped on to wire rope or aircraft cable.

Stainless Steel T316
Machined
Machine or roller swage is required

These swage fork ends are designed to be crimped on to wire rope or aircraft cable.

• Forged from special C-1035 steel, fine grain, special bar quality.
• Speroidized annealed for cold swaging.
• Swage sockets are recommended for use on 6 x 19 or 6 x 37 IWRC regular lay ropes. They are also satisfactory on galvanized bridge rope. They are not recommended for use on fiber core or lang lay ropes.

Sockets properly applied have an efficiency rating of 100%. This rating is based on the catalog strength of wire rope.

These open swage carbon sockets are designed to be crimped on to wire rope or aircraft cable.

CAUTION

Swage sockets are recommended for use on 6x19 or 6x37 IWRC regular lay ropes. They are also satisfactory on galvanized bridge rope. They are not recommended for use on fiber core or lang lay ropes.
Before using sockets with other type lay, construction or grade of wire rope, it is recommended that the termination be proofloaded to prove the adequacy of the assembly.

These open swage stainless steel sockets are designed to be crimped on to wire rope or aircraft cable.

• Upson-Walton™ Machine Fork Terminals are drop-forged from C-1035 special bar quality, self-colored steel.
• Plated and galvanizing are available.
• Call for price breaks.

These fork terminals are designed to be crimped on to wire rope or aircraft cable.

Strap Fork End

*Please indicate if you need commercial grade or military grade when ordering. The “SP” part number is for commercial grade and the “NAS1435” part number is for military grade.

These strap fork ends are designed to be crimped on to wire rope or aircraft cable.

These strap ends type I are designed to be crimped on to wire rope or aircraft cable.

These strap end type II are designed to be crimped on to wire rope or aircraft cable.

Material: Steel
Yellow Zinc plating

These open strap clevis are designed to be crimped on to wire rope or aircraft cable.

Material: Steel
Yellow Zinc plating

These step end clevis are designed to be crimped on to wire rope or aircraft cable.

These strap end stainless steel are designed to be crimped on to wire rope or aircraft cable.

Corrosion Resistant Steel

MS FITTINGS DO NOT INCLUDE CLEVIS PINS OR COTTER PINS. THESE MUST BE ORDERED SEPARATELY.

These clevis pin & cotter pins are designed to be crimped on to wire rope or aircraft cable.