1. MIL-DTL-83420M
2. MIL-DTL-83420/1 (Type I, Comp A)
3. MIL-DTL-83420/2 (Type I, Comp B)
4. MIL-DTL-83420/3 (Type II, Comp A)
5. MIL-DTL-83420/4 (Type II, Comp B)

Type I = Bare Cable
Type II = Jacketed Cable
Comp A = Carbon Steel
Comp B = Stainless Steel

• Type I - Non-flexible 1x7 class
• Type II - Non-flexible 1x19 class
• Construction 1 - Right Lay
• Construction 2 - Left Lay
• Composition A - Carbon steel, zinc coated
• Composition B - Corrosion resistant steel

Wire Rope, flexible, corrosion-resisting, non-magnetic, for aircraft control

Type I - 19 x 7 - Nonrotating for aircraft rescue hoist
Type II 10 x 7 - Nonrotating for cargo handling (winching)

MIL.Spec MS51937
Machinery Eye Bolts

Stud MS21259* (AN 666) *Stainless Steel *Specify RH Thread or LH Thread

Locking Stud MS21260 (AN 669) (NAS 650)

These stainless steel plain balls are designed to be crimped to a wire rope or aircraft cable.
Note: a select handful meet specification NAS494 & BACT14B.

These eye ends are designed to be crimped on to wire rope or aircraft cable.

These fork ends are designed to be crimped on to wire rope or aircraft cable.

Corrosion Resistant Steel

MS FITTINGS DO NOT INCLUDE CLEVIS PINS OR COTTER PINS. THESE MUST BE ORDERED SEPARATELY.

These cable busing thimbles are designed for a wire rope to be installed around the thimble.

These stainless steel thimbles are designed for a wire rope to be installed around the thimble.

These zinc plated thimbles are designed for a wire rope to be installed around the thimble.

• Designed for 6x19 IWRC or 7x19 right regular lay 1/8" - 3/4"
• 90% strength efficiency 
• These safe -line wire rope clamps are designed to be clamped onto a wire rope or aircraft cable

The MS21256 series clips are designed to fit the MS21251 Turnbuckle and lock into place the mating part. MS21256 (Same as NAS651)

(Same as NAS 645)
(Replaces AN 161)

MS21254C Stainless Steel
(Same as NAS 648) (Replaces AN 165)

MS21255C Stainless Steel
(Same as NAS 647) (Replaces AN 170)

Item # with "L" includes a latch