Unit of Measure

Specifications

Size D

N/A 2 "

WLL

N/A 43 ton

Standard Package

N/A Bulk

Weight

N/A 39.00 lb

Style

N/A Screw Pin

Finish

N/A Self-Colored

Dimension P

N/A 2.25 "

E

N/A 2.38 "

Dimension W

N/A 3.28 "

Dimension R

N/A 4.51 "

Dimension L

N/A 7.44 "

Minimum Dimension B

N/A 5.50 "

Material

N/A Alloy

Benefits and Features

N/A

  • Made of Special Bar Quality (SBQ) steel having fine grain, reduced sulfur and phosphorus.
  • Shackles show major deformation before failure.
  • Working load limit and traceability codes shown as permanent markings on body.
  • All shackles have alloy quenched and tempered pins.
  • Available in sizes 3/8" to 3".
  • Available finishes include powder coated, galvanized or self-colored.
  • Shackles meet dimensional and performance requirements of RR-C-271.
  • Special testing and certification is available upon request at the time of the order.
  • CM® Smart ID RFID technology is available as an option on screw pin anchor shackles sizes 1/2" to 1-3/4" and bolt, nut & cotter shackles sizes 3/4" to 1-3/4".

Note

N/A To order products with CM® Smart ID RFID technology add "-RF" after the product number. RFID-equipped rigging products are not eligible for our In-Stock Guarantee.

Meets performance requirements of federal specification: RR-C-271 Type IV A, Grade B. CM® Alloy Shackles are designed with a 5:1 design factor and have a strength rating approximately 50 % higher than a comparable-sized carbon shackle and about 25 % stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections.

Made in the USA.

Grade B alloy shackles are typically used on wire rope loops for lifting or towing.