Lexco Cable
LEADERS IN CUSTOM WIRE ROPE ASSEMBLY FABRICATION
Wire Rope Configurator

1.800.626.6556 sales@lexcocable.com

Wire Rope Configurator
Request Information
Unit of Measure

Specifications

Innermember Fitting @ 3000 lb

 N/A CS550-2

Innermember Fitting @ 1500 lb

 N/A CS550

Conduit Fitting @ 3000 lb

 N/A 072 073

Conduit Fitting @ 1500 lb

 N/A 062
Dim A1 N/A 3.23 "3.36 "
Dimension Bmin.2 N/A 3.87 "4.00 "
Dimension Bmax.3 N/A 5.47 "5.60 "
  • 1 Dimension A is with the lever in full “OFF” position. Use dimension A in calculating cable length.
  • 2 Dimension B minimum is with the lever in full “ON” position and adjusted for minimum (CCW) travel. Use dimension B minimum during installation and initial adjustment. Turn knob (CW) to add travel and increase brake pressure setting.
  • 3 Dimension B maximum is with the lever in full “ON” position and adjusted for maximum (CW) travel.
2.5 inches (64 mm) wide side plates; one cable, with three alternate sets of cable clamp holes. For cowl, instrument panel, seat riser or frame installation.

Kit B815 - supplied with the following hardware:
  • Clevis Pin
  • Cotter Pin
  • Washer
  • Mounting Spacers (2)
  • Cable Clamp
  • Clamp Base
  • Clamp Spacers (2)